Fiber Optic Jumper Patch Cord FC-LC Single Mold

We will win your trust and establish a long-term friendly partnership with the best service and the best quality 1x4 LGX PLC Splitter, SC FBG Reflector Male Female, RFOG And XGS PON Module. With our self-confidence and down-to-earth efforts, we carry out the spirit of service and insist on excellence. In the fierce market battle, we liberate our minds, win together and make progress together, in order to cooperate for the future. The company has a large number of ideal, high-quality, dedicated management and professional technical personnel.

SC To SC OM3 Patch Cord

1.SC to SC OM3 patch cord is booming these years. Since the construction of data centers is mainly based on short-distance transmission, in the application of short-distance transmission, the performance of multi-mode fiber and single-mode fiber is similar , but the cost is lower, and OM3 multi-mode fiber can support higher rates. In the era of high-speed network, the demand for multi-mode fiber should not be underestimated.

2.OM3 is a 50um core diameter multimode fiber optimized by 850nm laser. In 10Gb/s Ethernet using 850nm VCSEL, the fiber transmission distance can reach 300m; the maximum transmission distance in 1G, 10G, 40G/100G states is 1km respectively , 300m, 100m.

3.OM3: The flame-retardant outer skin can prevent the spread of flames, prevent the emission of smoke, acid gas and poisonous gas, and meet the needs of 10 gb/s transmission rate;

Compared with OM1 and OM2, OM3 has higher transmission rate and bandwidth, so it is called optimized multimode fiber or 10 Gigabit multimode fiber.

4.OM3 fiber optic cables are usually used in the wiring environment in the data center, supporting the transmission of 10G and even 40/100G high-speed Ethernet.

Parameter	LC/SC/FC/ST/MU/MTRJ/E2000
	SM		MM
	UPC	APC	APC
Work Wavelength (nm)	1310,1490,1550		850,1300
Insertion Loss (dB)	≤0.25	≤0.20	≥65
Return Loss (dB)	≥55	≥65	≥55
Repeatability (dB)	≤0.10
Interchangeability (dB)	≤0.20
Plug Testing (time)	≥1000
Tensile Strength (N)	0.9mm(9N); 2.0mm(70N); 3.0mm(75N)
Durability (dB)	≤0.20
Operation Temperature (℃)	-40~+85
Storage Temperature (℃)	-20~+75

Features

• High quality CCTC ceramic ferrules

• Good repeatability and interchangeability

• Perfect solution for installs that require

• CE/CPR/ISO/ROHS√

• 100% 3D tested/Temperature tested/Loss tested before delivery

• High and low temperature cycle test

• Stable data interchangeability

• Long mating cycles

Apllications

Certifications(Strictly GR-326 Standard)

CTI: temperature test

CTI: drop test

CTI: durability test

CTI: temperature and humidity test

CTI: temperature test

CTI: loss test

CTI: resistant to bending

CTI: sine vibration test

OM3 fiber is an optical fiber designed to work with VCSELs. It conforms to the OM-3 fiber specification of ISO/IEC11801-2nd and meets the needs of 10 Gigabit Ethernet applications. There are many types of OM3 optical fibers, including indoor type, indoor/outdoor versatility, etc. The number of cores of the optical fiber is from 4 cores to 48 cores. All legacy multimode 50/125 fiber based applications are also supported, including support for LED light sources and laser light sources.

Relying on mass production and reliable quality, our Fiber Optic Jumper Patch Cord FC-LC Single Mold is well-received in domestic and international markets and has gained a good reputation from our customers. We inherit and carry forward the spirit of daring to take responsibility, to innovate and to be the first in the world, and constantly strive for the future of the enterprise. After more than ten years of development, our company has grown into a strong and mature integrated service platform.

Hot Tags: sc to sc om3 patch cord, China sc to sc om3 patch cord manufacturers, suppliers, factory, fiber optic products, plc splitter for education industry, fiber splitter 1x2, cable actuator assembly, fiber cable telecommunications, hybrid cable