Frequency Division Multiplexing

Frequency Division Multiplexing Technology FDM (Frequency Division Multiplexing).

Frequency division multiplexing takes advantage of the fact that the available bandwidth of the communication line exceeds a given bandwidth. The basic principle of frequency division multiplexing is: if each signal is modulated with a different carrier frequency, and each carrier frequency is completely independent, that is, the frequency bands occupied by each channel do not overlap each other, and adjacent channels use "" "Guard Band" isolation, then each channel can transmit a signal independently.

The main feature of frequency division multiplexing is that the signal is divided into several channels (channels, bands), each channel does not overlap with each other, and the data is transmitted independently. Each carrier signal forms a non-overlapping, isolated (discontinuous) frequency band. The receiver uses a bandpass filter to separate the signal. Frequency division multiplexing is widely used in radio broadcasting and television. ADSL is also a typical frequency division multiplexing. ADSL uses the method of frequency division multiplexing, and uses twisted pairs to divide three frequency bands in PSTN: 0~4kHz is used to transmit traditional voice signals; 20~50kHz is used to transmit data information uploaded by computers; 150~500kHz Or 140~1100kHz is used to transmit the data information downloaded from the server.


You Might Also Like

Send Inquiry